3DKATTEN
Nevermore StealthMax Basic/Smart Kit
Nevermore StealthMax Basic/Smart Kit
In stock
Couldn't load pickup availability
Nevermore StealthMax
The Nevermore StealthMax is an air filter developed for 3D printers. With its activated carbon and HEPA filtration, it aims to capture harmful fumes and unpleasant odors generated when melting plastics, creating a safer and more pleasant environment for makers.
Complete hardware and electronics kit as per BOM to build the Nevermore Stealthmax. Choose between the Basic kit with the hardware and fan needed to get going. Or get the fancy Smart kit which include a pi pico to use as a nevermore controller together with sensors to measure the air quality in your filter.
You only need to supplement with the active carbon and power adapter if you want to feed it externally.
GitHub: https://github.com/nevermore3d/StealthMax
Content
| Electronics | Basic |
Smart |
Quantity |
| Nevermore 65mm Fan |
x |
x |
1 |
| BME280 | - |
x |
2 |
| SGP40 | - |
x |
2 |
| Mateksys 6-30V Converter | - |
x |
1 |
| Raspberry Pi Pico W | - |
x |
1 |
| Hardware |
|||
| M2x4 FHCS | x |
x |
4 |
| M2x6 Self Tapping |
x |
x |
5 |
| M3x10 BHCS | x |
x |
10 |
| M3x12 SHCS | x |
x |
10 |
| M3x6 BHCS | x |
x |
30 |
| M3x16 SHCS | x |
x |
2 |
| M3x20 SHCS | x |
x |
3 |
| M3x25 SHCS | x |
x |
5 |
| M3xD5.0xL4.0 Heat Sets |
x |
x |
35 |
| Filtration |
|||
| HEPA filters | x |
x |
4 |
| Fittings |
|||
| PC4-M10 Coupling |
x |
x |
1 |
| Sealing |
|||
| Linneo 250mm PC Panel |
x |
x |
1 |
| 3mm round EPDM Sealing strip |
x |
x |
1 m |
| Wiring |
|||
| 1x40-Pin angled header |
- |
x |
1 |
| AWG24 Cable |
|||
| - Black |
- |
x |
50 cm |
| - Red |
- |
x |
50 cm |
| AWG26 Cable | |||
| - Black |
- |
x |
70 cm |
| - Red |
- |
x |
40 cm |
| - Blue |
- |
x |
40 cm |
| - Green |
- |
x |
70 cm |
| - White |
- |
x |
50 cm |
| - Yellow |
- |
x |
40 cm |
| - Brown |
- |
x |
20 cm |
| JST-PH 4-pin Connector | x |
x |
1 |
| DuPont 4-pin Housing |
- |
x |
5 |
| DuPont 5-pin Housing |
- |
x |
1 |
| DuPont Crimps |
- |
x |
35 |
| Heat shrink tubing | x |
x |
1 |
| M8 Threaded DC Connector | x | x | 1 |
NOTE: Power supply is not included. You need to supplement with either a 12 V DC adapter (at least 1 A, preferably 1.5 A or more) or feed it from a suitable 12 V DC source in the printer. The DC Plug to do this is included in the kit.
Share
